Narrow Gauge North

2027

A 009 layout by Brian Twigg
Scale 7mm/1ft
Gauge O16.5
Size 6’6" x 2’

In the world of 009, a modeller called Ted Pollet, a Dutchman, is well regarded as a modeller, and as well as his large home based 009 model, he produced a small exhibition layout of approximately 2900 x 450mm (3ft x 18ins) in old money. He called it “ Nixnie “ which I understand means little, and the design caught my eye as a possible entry level to my move into 0/16.5. I decided to copy the design in 0/16.5, this required an increase in baseboard size to 1350 x 600mm , (4’6” x 2ft) to be able to accommodate the minimal track plan, still a one man manageable size, and my layout of “Knottworthy Magna”, was born. I have acknowledged Teds design in all my scribing’s, and the layout name is a play on words, as I make no pretence of my efforts being worthy of Ted’s expertise or abilities.

So to the layout itself. Because of my increasing disabilities and age, the layout had to be small and light, I was lucky enough to acquire a free piece of 1800 x 600 x 50mm (6ft x 2ft x 2”) blue Styrofoam from a builder friend. This is a very dense version of the foam beloved of modellers for bulking out scenery contours, and this became my baseboard. I made a simple 6mm thick MDF box, 150mm deep to enclose the dimensions of the Styrofoam, fitted 25x25mm battens around the inside of the box to support a piece of 6mm MDF, 50mm down from the top, which supports the blue Styrofoam, and leaves a 100mm free space below for wiring and any works required. I pasted the top and underside of the Styrofoam sheet with heavy duty wall lining paper, on which I could draw the plan of the layout. The plan was simply a slightly modified copy of the “Nixnie“ layout, enlarged to accommodate the increase in scale to 7mm, 0/16.5.

Basically, this is a simple oval, divided diagonally end to end by a 350mm (14”) high central back scene, with a hole for the half circle of track to pass through from one side to the other at each end. The track runs as close to the sides and end of the base board as can be accommodated.

Along one length, (which I will call the front,) is a passing loop to create a station platform, before the line enters a tunnel through the central back-scene divider, before emerging at the other side, (which I will call the back view), onto a trestle bridge crossing a river, and running along the back edge and joining the circle of track through a hole in the back-scene that returns it to the front view. The views through this back scene hole are masked at each side by large trees.

The back view of the lay out has a card kit, half relief factory building, purchased from a company called “Purple Bob”. This backs onto the central divider, fed by a spur from the main line, for the inter change of raw and manufactured goods, into an inglenook type three road siding of two open goods yard sidings and a third covered factory goods facility.

A TTe layout by Blair Hobson
Scale TTe (1:120)
Gauge 6.5mm
Size 6’6" x 3’

“A Taste of Alber” - Czech Narrow Gauge A TTe layout based in the south of the Czech Republic “A Taste of Alber” is a model of a station on the 760mm line in the south of the Czech Republic centred at Jindřichův Hradec. The real line still exists, run by a private company (the JHMD) who “bought” the line for 1 Czech Crown from the State! They still run a full passenger service and also steam hauled Tourist trains and some goods trains.

They use a wide variety of stock in a multitude of colours, including several steam locos used for summer specials.

Alber is an actual station on one of the lines together with its viaduct. However this layout is simply a representation of what I think is a very modelable scene rather than an exact copy. So, for instance, the buildings are all different to the original but key features such as the water crane on the viaduct and the weighbridge are as the prototype.

The model is in TT scale (1:120) using 6.5mm gauge track (from Z scale), designated TTe.

The plain track is scratchbuilt at the front of the layout using Peco code 60 rail and copper clad sleeper strip, the points Marklin Z, and Peco Z flexitrack is used in the fiddle yards. The buildings are a mixture of Czech laser cut and Auhagen plastic kits. The baseboards are made from 6mm and 9mm plywood with 1” square softwood strengthening.

Stock is a mixture of kit and scratchbuilt on Z scale mechanisms from Marklin and Rokuhan. There are several manufacturers based in the Czech Republic who produce brass kits of various items of stock and Shapeways also produce a TTe version of the Lxd2.

More information on the real line can be found on their website at www.jhmd.cz and there are a couple of books on the line and on the Steam and Diesel locomotives.

An 0 16.5 narrow gauge modular layout from Yorkshire members of the 7mm Narrow Gauge Association
Scale 0 16.5 (7mm to 1ft)
Gauge 16.5mm
Narrow Gauge modelling in 7mm:foot

Yaggenthwaite: the 7mm NGA Yorkshire Area Group modules An initial idea to get people modelling has grown until a “layout” of anything from 7 to 50 feet in length exists. It started in 2001 with the concept of small modules that each individual could develop but bring together for a longer running line than would be feasible at home. Each of the original four boards (36” by 18”) had three inches of Peco proprietary 0-16.5 trackwork in place at each end.

The view was that if somebody actually got around to building a layout the whole thing would be a success. Originally it was never envisaged that it would be exhibited or develop into a layout although that has now changed. There was no set order for sequencing the modules giving endless permutations – a situation which still prevails. Another helpful feature was that it is not necessary for everyone to be present with their module every time.

The basic rule is that each module is 18 inches wide at its end with the track a standard distance from the front edge. Uniting the modules is a uniform backscene: 9 inch high pieces of ply bolted to the back. Common wiring and other protocols are in place.

We have shown here the work of three people, with two cassette ends and an intermediate area which can be used a “fiddle yard” as well; it also allows stock to be run in a continuous circuit if one of the operators wants to talk to somebody!

In 2005 the modules had their first public display: the National Coal Mining Museum near Wakefield and later that year at the NGA’s annual convention. They have also made appearances at NGA Bradford Members’ Days; Narrow Gauge North, Leeds; Narrow gauge South West, Shepton Mallet.

The name is fictious but based on the Yorkshire Area Group with something that sounds as if it could have existed somewhere within the West Riding.

We would recommend the approach, as it is possible to build up a layout in small stages and gives the possibility of home operation and group participation.

Quite a few people have been drawn into the world of active narrow gauge modelling as a result.  It has certainly given a focus to the Yorkshire Area group of the 7mm NGA.

An O scale narrow gauge layout by Richard Turner
Scale O ¼”/1ft (1:48)
Gauge 16.5mm
Size 22’ x 2’

Camp 93 is a prototypical logging operation based in WashingtonState towards the end of the logging in the 1930’s.  The layout is O scale ¼” to one foot (1:48) and with a track gauge of 30 inches.

Operation of locomotives and layout is by DCC with sound.  Listen to the clanking of pistons, and the echoes of the steam whistles through the mountain gorge and tall timbers.

Gradients of 8% are worked hard to bring logs of up to 12 feet scale diameter down from the fell.  Remaining layout trees are up to 16 feet scale diameter, and disappear into the lighting facia.

Locomotives include Shay and Climax geared locomotives, which can be seen working a small supply yard and moving logs down the inclines from higher camps, off to the mills.  A variety of other stock can be seen including rail trucks and rail buses.