Narrow Gauge North

2027

Exhibitors : Previous

Coed Helen

A Nn3 layout by Ian Coe
Scale Nn3
Gauge 6.5mm
Size n’ x n’

 

Darius, Washington State

A On30 layout by Harvey Faulkner-Aston
Scale On30
Gauge 16.5mm
Size 4’2" x 1’8"

The setting is the Pacific Northwest where the redwood is king. The scene depicts the backwoods engine facility for the Marten’s Pine logging operation. The layout features Shay and Climax type locomotives from Bachmman and scratch-built freight cars based on the Mich-Cal Logging lines. All structures on the layout are scratch-built from strip timber.
 

 

Llugwy Valley

A layout by M Savage
Scale 5.5mm/ft
Gauge TBC
Size n’ x n’

Information to follow

 

Wrose Village

A layout by the Yorkshire Group of the 7mm Narrow Gauge Association
Scale O 16.5
Gauge 16.5mm
Size TBC

This layout is described as 0-16.5 – it is 0 gauge (7mm to the foot or a ratio of 1:43.5) but running on 16.5 mm gauge track (the same gauge as 00 or H0 track). This track work represents a 2’3” prototype gauge; it is proprietary PECO 0-16.5 track.

It is principally designed as a means of running various narrow gauge models – some licence has been used in that many actually ran on 2’ 0” track (which should be 14mm gauge in 7mm:foot) but the existence of many standard components in 16.5 mm make this a common compromise used by many modellers. The curves preclude longer wheelbased rolling stock mainly because of the overhang required and excessively wide clearances required in the tunnels. There is a long term plan to build another layout with shallower curves to allow longer stock.

You may see some American based models – these are 1:48 scale or 0n30 (16.5 mm represents 30 inches in the USA scale).

Originally built by Dave Hodgson in 2002 -3 it is now owned by David Charlesworth and can normally be found in Keighley MRC Clubrooms, South Street, Keighley. Some changes to the original scenery have been made but more is to be done. At the right hand end a new road, with a tram route along with buildings at the back is being constructed; and the retaining wall has recently been renovated. A small gas works is planned for the siding area. There are a number of other details to be added to lend as authentic air to layout as possible.

We are keen to expand our small group so please ask about being involved.

Summit

A 009 layout by owner Paul I Davies
Scale 009 (4mm/1ft)
Gauge 9mm
Size 3’ x 1’

A 3' x 1' 009 layout by Paul Davies.

For the past decade, Fantasonics™ Engineering has featured a delightful imaginary railroad, The Incredible Dizzying Heights Railroad, on their popular website, "The Model Railroad Magic Website." This little "railroad above the clouds," shown in a series of drawings by artist Dan Sawatzky, has fired the imaginations of thousands of model railroaders. Now Andrew Milner, from Huddersfield, West Yorkshire England, has created a magical OO9 model of this fabled line, naming it Summit after the principal station on the Fantasonics railroad. Though this layout isn't square like most pizzas, it is an unbroken circuit and thus topologically equivalent!

Go ahead—take a look at the original drawing, then come back here and check out Andrew's imaginative modeling of the line and enjoy the photos below. It feels mundane to describe the technical details when our heads are up in the clouds, but here's Andrew on the subject: "Summit is a OOn9 loop based on the drawings found on the covers of the Fantasonics sound CD’s. The layout is built on ½in plywood so getting the lower level to look like it was in the clouds was a challenge. I used girder bridge sides and cotton wool for clouds to try to give the effect. The narrow gauge loco is a scratchbuilt body on an 0-4-2 chassis converted to 0-4-0. Everything else is scratchbuilt—buildings, bridges etc from stripwood, painted plaster for rocks."

The layout measures 36x12in (90x30cm) and was built as a module for an eccentric modular layout created by members of the online Cheshire Railway Modellers, where independent OO modules were designed so they could be joined to create a cooperative layout. (This explains the OO track at the lower level of Andrew's layout.) Summit premiered, alongside the other members' modules, at the club's annual show in January 2009.

Text and photos provided courtesy of "Micro/Small Layouts for Model Railroads"


 

Megantic

A On2 layout by Bob Harper
Scale 1:48

Megantic is the latest, and last part of my Maine(USA) 2ft gauge system; I've now filled every possible space in my basement!

Megantic is the other end of the line from Franklin, and also the source of the timber used in the sawmill at the junction with the main line. The station is mainly based on Bigelow, on the Sandy River system, though some of the scratchbuilt structures come from other stations on the 2ft lines. Most of the rolling stock are now kit or scratch-built models of genuine Maine vehicles, but the severe space restrictions mean that I am limited to small “Forney” style tank engines and short trains.