Exhibitors : Previous
Ulvaryd (Strand)
| By | Charles Insley |
| Scale | 4mm |
| Gauge | 9mm |
| Size |
4' x 2' |
The layout is set in southern Sweden, on the shores of Lake Vättern in Västergötland. It is the lakeside terminus of the Ulvaryd-Mjölltorp Järnväg (the Ulvaryd-Mjölltorp Railway), a 60cm gauge (2ft) railway which connected the small lakeside town of Ulvaryd with the standard gauge line from Skövde to Karlsborg. The railway was built in the early 20th century, inspired by the success of the Helsingborg-Råå-Ramlösa Järnväg. Like the HRRJ, the UMJ began its life with imported French locomotives and rolling stock built by Decauville. Some of these French locomotives are still in service. These were followed by locally built stock, from builders such as Munktells, Motala, NoHAB and Helsingborg Mekaniska Verkstad. In reality, the layout is freelance, but inspired by the Swedish 60cm gauge lines that existed until the early 1950s, in particular the HRRJ, the Kosta-Lessebo Järnväg and the Jönköping-Gripenbergs Järnväg. All are now closed, but surviving locos and stock can be seen at Mariefred, on the preserved Östra-Södermanlands Järnväg (www.oslj.nu/ )
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
-
Ulvaryd Strand
Ulvaryd Strand
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId431f52b52f
Un-Named
A 09 layout by Howard Martin
Scale 09
Gauge
Size ? x ?
A currently Un-Named layout, to be exhibited by Howard Martin
Under Cover
A 009 layout by Darryl Foxwell
Scale 4mm/1ft
Gauge 9mm
Size 8" x 8"
The layout depicts the use of camouflage in war, particularly hiding things from aircraft flying over the area. The scene could be set in Southern England prior to D-Day or Germany in the final months of the Second World War. Current exhibitions are showing the German scene where, with airfields being bombed by the Allies, aircraft were hidden in the local woods, and used the autobahns to take off and land. The area is served by a narrow gauge railway running through the woods, with another section built on the autobahn. A wide variety of diesels and steam locos can be seen as well as Tiger tanks moving into defensive positions. In this heavily wooded area three sections of camouflage netting can be seen covering fighter aircraft, with a variety of soft skinned vehicles dispersed among the trees.
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
-
Title
Title
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId71d547e9ec
Underhill - Isle Of Stoner Railway
Underhill - Isle Of Stoner Railway by John Wooden
Scale 009 (4mm/1ft)
Gauge 9mm
Size 4’6" x 4’6"
The layout represents in 009 scale the two ends of the branch line to Underhill of the Isle of Stoner Railway. The mainline runs from one end to the other of one of the less well known channel islands, the Isle of Stoner, which lies about 100 miles south of Newquay in Cornwall.
The right hand baseboard has the terminus of the branch line at Underhill, with its small unused quarry. The other board has the cheese factory and its associated herb nursery; the island is famous for its green cheese. This stands in front of the running line, where it emerges from under the hill on which the main island town of Port Lucy stands.
The layout is the portable part of the IoSR, as the mainline lives in my garage, and is distinctly not portable, or finished. Being entirely freelance I can have anything I like, rolling stock wise, but I do try to keep a reasonably uniform and plausible look to things. The story is that having been built in the 1870’s, the line peaked around the turn of the century, and ran down towards the second world war, when the island was invaded by the Germans, who used the railway for their own purposes, but left it in a parlous state. After the war Lord Stoner was inclined to close the railway, but a preservation society persuaded him that they would keep it running and help get things going. We find the railway in the summer of 1964 and things are on the up.
More news about the Isle Of Stoner railway can be found here.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId7588ee4a82
Untermutten
A HOm layout by Dave Howsam
Scale 3.5mm/1ft
Gauge 12mm
Size 7’ x 3’
Untermutten is a fictitious location in Switzerland on the Albula line of the Rhätische Bahn from Chur to St Moritz' although Mutten, and in summer Obermutten, is served by post bus from Thusis. The layout was developed as somewhere to run my stock which had been unused for over 10 years since the sale of my previous small HOm effort, Obermutten, and, if required, as a one day exhibition layout.
It was initially made 6'2" long but it was cut down to six foot to fit in the car and allow my wife to come along too! The track originally curved away at both ends -symmetrically, under a bridge and into a tunnel. I found that with this and the loss of the 2 inches I could not quite get a 4 coach train in the station loops. An extra piece was added and the curve moved onto the new board. So much for keeping baseboards, baseboard joints and set up time to a minimum.
An 8 road traverser, using extending drawer runners, allows for maximum length trains in the storage area. It takes longer to change tracks with a traverser than points but in a given space can give a greater number of trains and longer ones.
Track work is Bemo with their code70 (Shinohara) track in the station & the original track elsewhere. A combination of the Bemo 330mm & 376mm set radius curves is used. Points are powered by Bemo motors using brass strip for linkage. Point lanterns work from the points with a replacement operating wire. Ballasting is carefully carried out using Woodlands Scenics. The station building and hotel (inspired by the Hotel Grischuna at Filisur) are from Kibri kits but the trafo tower is a finished Bemo model. Landscaping uses Woodlands Scenics and Anita Decor whilst the trees, made from sea moss, are treated with the latter's foliage. Herpa/Bemo uncouplers with a new ramp, original Bemo signals and a D & R bell unit complete the scene.
Nearly all the stock is Bemo but only a limited variety can be shown. It is possible to reverse the trains so that 'what goes up comes down' but this slows things down and can lead to not enough train movements out front. The period is set in the late eighties dictated by the stock I had amassed.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId2b32b4fe0b
>
Up the Line
A 7mm layout
During the latter part of World War One a very extensive system of narrow gauge light railways was developed to bridge the gap between standard gauge railheads and the front lines. Up the Line depicts one of these railways at 7mm to the foot using OO gauge track at the point a couple of miles behind the lines where petrol tractors take over from steam locos. Everything is either scratch or kit built using many up to date techniques including 3D printing and sound fitted locos.
Although not based on any particular location I have recreated many individual scenes from contemporary photographs mainly in the Arras area.
If you would like to know more about the construction of this layout, I have been recording it’s progress in a blog on www.rmweb.co.uk
-
Up The Line
Up The Line
-
Up The Line
Up The Line
-
Up The Line
Up The Line
-
Up The Line
Up The Line
-
Up The Line
Up The Line
-
Up The Line
Up The Line
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId9420bd87f5
Vals
| By | Roger Epps & Nathan Bridge |
| Scale | HOm |
| Gauge | 12mm |
| Size | 5.25m x 1m |
In the Canton of Graubunden at the head of the Valser valley is the village of Vals which sits on one of the tributaries of the river Rhine. In the early 20th century it was proposed that a line should be built from llanz on the Rhaitische Bahn to Vals for tourist travel to the thermal baths and transport of Granite and forestry products.
With the outbreak of World War one in 1914 the proposals were put on hold and after the war ended in 1918 the proposals were never revived. We have decided to model what could have been.
The layout sees passenger and freight services in form of loco hauled and railcar trains. The main source of out going traffic is logs, minerals and Valser water from the newly built bottling plant. The occasional steam hauled heritage train can be seen.
The track work is Peco code 75 HOm track. The point control is DCC powered by a Roco Z21 with Digikeijs point accessory modules powering Peco point motors.
Buildings are a mixture of Kibri and Faller, signals are from Schneider. Scenics are a mixture of Woodland Scenics, Aughagen, Busch and Noch. A faller car system has also been added to the layout.
Any Questions or comments please ask one of the operators.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=190#sigProId4266301221