Exhibitors : Previous
Bottle Kiln Lane
A 009 layout based on a fictitious location somewhere in England, by John Thorne
Set in the 1930s this small narrow gauge line runs through the English countryside and serves a small canal and pottery. The pottery is based on the buildings of the Coalport factory in Ironbridge. The layout is of no particular prototype but provides the opportunity to showcase a wide variety of 2ft gauge narrow gauge stock.
The layout is 8ft long. The central module is 4ft long and a 2ft module bolts on to each end. Each 2ft module incorporates a fiddle yard each of which incorporates five cassettes which mean that ten trains can be stored to run onto the layout. The station lies at the end of Bottle Kiln Lane and is the main station on the line located in the centre of the line. This means that trains enter the layout from both directions and as the loco shed is also located at the station locos are exchanged at the station and stock can be shunted into the various station sidings or down to the canalside. This means that there is a constant changing variety of locos and stock.
The layout uses Peco 009 Crazy track. Some of the buildings are scratchbuilt but also on the layout are two Hornby Scaledale items which have been used as scratchbuilders aids being considerably improved and weathered. The majority of the locos and stock are scratchbuilt and feature both steam and diesel prototypes. The wide range of industrial steam and diesels are built in plasticard and they run on a wide variety of chassis from Germany and Japan.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProIdc6288adf5b
Bridale
A 7mm Scale layout by Irvin Dalton
Set in the 1960's, Bridale is a fictitious scene of a timber merchant operating in a rural setting. Logs arrive in their natural state from a nearby forestry site and leave as processed timber.
The narrow gauge railway also serves the local community and is starting to attract tourists to the area. This may help secure the line for the future.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProId7f020f50b1
Bridges
A 009 layout by Hugh Milward
Scale 009 (4mm/1ft)
Gauge 9mm
Size 70cm x 90cm
My last layout was a fiddle yard to industrial sidings, and so for this layout I wanted a continuous circuit so that at exhibitions I could watch the trains go round and round.
The layout is nearing completion with just some more details to add.
Layout Size
The Layout measures 70cm x 90cm and is free standing on its own legs. The layout height has been deliberately set at a height of 1 metre and 30cm so that it can be viewed through the bridges.
Access is required around one side so that the Operator can view and control the low level section of the layout from the front.
Theme
The layout is intended to be a narrow gauge line in an industrial setting, with a canal, factories, tight curves and short sidings. The canal is dirty and run down and is crossed by five bridges carrying tracks to the factories hence the name.
The period is set in the 1930’s – 1940’s
Track Work
Track work is all hand built using Peco 75 code rail and copper clad sleepers, including a three-way point. The points are operated by “Ceep” point motors.
There is a short section of dual gauge track work where the standard gauge comes in to the quay side. This is to EM gauge.
Baseboard Construction
The baseboard is open plan 6mm ply, topped with Sundeala. There is a small “Fiddle Yard” loop at the rear of the layout.
The Layout size was dictated by the boot of my car and the cupboard where I store the layout when not in use.
Scenery
The back scene and buildings are made from “Wills” plastic sheet and buildings which have been heavily adapted.
Stock
Stock is a mixture of kit build and scratch built engines and wagons.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProId640861f6d5
Bron
| By | Stuart Bass |
| Scale | 4mm |
| Gauge | 9mm |
| Size | 6'x 2' |
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProId18ee4a7116
Bronaber Sidings
A 5.5mm layout by Mike Chinery
Scale 5.5mm/1 foot
Gauges 12mm & 16.5mm
Size 6’ x 1’6"
This small layout has been produced in order to show what is possible in this scale. The rolling stock, track, figures and road vehicles are all commercially available. The scale itself is unusual, but has been around for a long time. It was introduced by GEM in the early 1960's, and was used to produce the first commercial range of British narrow gauge models. It had great potential but lost out to the introduction of mass produced HOe scale (3.5mm/foot on 9mm gauge track) models from the continent.
In the late 1980's an Association was formed to support the scale and in 1996 Malcolm Savage bought the original range from GEM.
Many of the old models have been improved and reintroduced, and new models have been produced. Other manufactorers have started making their products available in this scale, something that never happened the first time around.
Please see here for futher details of the 5.5mm Association
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProId12cb405383
Bunny Mine
| By | David Rae |
| Scale | O14 |
| Gauge | 14mm |
| Size | 6' x 1' |
Bunny Mine represents a gypsum mine adit of the type which operated in South Notts around Bunny Hill, Gotham and East Leake in Nottinghamshire.
These were served by narrow gauge railways, often of 2 foot gauge before they closed. Gypsum is still mined from Silver Seal mine, on the site of the model, and used for plaster and other products.
The model is set in the 1950s, built in 7mm:foot scale and uses the correct 14mm gauge track. The track is hand built. Locos and wagons are kit built or scratchbuilt. Real gypsum and moss from the site are used in the model. There are bunnies and other wildlife too!
There is additional information regarding this layout online - here
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProIdc72afbb6ad
Burgedorf
| By | Kevin Williamson |
| Scale | 1:87 |
| Gauge | 9mm |
| Size | 190cm x 40cm |
Bürgedorf is a small station on a typical narrow-gauge branch line in the West Austrian Tyrol. The layout gives a small taste of the fascinating railways in this beautiful Alpine region, especially the Zillertalbahn which formed its inspiration. Bürgedorf station has two platforms, a run round loop and a small goods yard. The regular train service consists of diesel hauled passenger and freight trains in the hands of ÖBB and Zillertalbahn locos, interspersed with steam hauled tourist trains headed by the characterful ‘U’ Class 0-6-2 tank locomotives. The line also serves the sawmill at Kämbach which generates a significant amount of timber traffic. The locos and rolling stock are by Liliput, Roco and Bemo and set the time period around the 1970s.
https://narrowgaugenorth.org.uk/index.php/traders/previous-years/85-public-news/exhibitors-previous?start=30#sigProId391f166e56